Shunjie Blog

Face, QR or Card? How to Arrange Office Access Credentials

Choose access credentials for employees, visitors and contractors. Plan door permissions, expiry, lost cards, offboarding and an approved backup.

Start with the person’s job and visit, then choose a credential that the entrance can read. A credential is the face reference, card or QR code a person presents to identify themselves. Regular employees can use a named card or face recognition where the equipment and workplace policy support it. Short-stay visitors can use an approved QR pass or a temporary card. Contractors need named, time-limited access matched to the work they will carry out.

Each choice needs an owner, permitted doors and hours, an end or review date, and a way to withdraw access. Also give people a workable route when face recognition is inconvenient, they have no phone, or a credential fails. Reception staff should know who can authorise that alternative.

Choose who may go where before choosing face, QR or card

Create a person record for each employee or contractor, and a visit record for a guest. Record who approved it and which entrance, floor or work area the person needs. Set the dates and hours, then issue the credential. For example, a visitor meeting the sales team needs the reception route and meeting area. Access to the server room would need its own approval.

The reader identifies a presented credential. The access controller, either inside the terminal or in a separate unit, checks the permission and controls the lock or pedestrian gate. A successful scan can still lead to refusal if the permission is outside its hours or applies to another door. A reception QR code may simply retrieve a booking for check-in. Confirm whether it also works as a door credential and at which readers.

A practical starting point for each person type

Use this table to choose a starting workflow, then adapt it to the people, doors and software at your site.

PersonCredential to considerAccess to assignWhat ends or changes it?
Regular employeeNamed card, face recognition or a supported combination, with an approved alternative.Workplace doors and hours for the current role.Role transfer, lost credential or leaving the organisation. Review ongoing access.
Short-stay visitorTime-limited QR pass where supported, or a temporary card issued at reception.Approved visit date, reception route and meeting areas. State any escort requirement.Cancellation, the visit end time or checkout where the system is configured to revoke access.
Contractor or service workerNamed card or supported QR pass. Consider face enrollment for an approved regular arrangement.Job dates, daily work hours and the required service route or work area.Job completion, suspension, a changed assignment or loss of the credential.

Employees: make daily use and changes easy to manage

A named card is straightforward when the office already has compatible readers and an issuing process. Confirm the actual card technology and reader configuration before buying replacement cards. A familiar card shape or the label “IC card” gives too little information to select a compatible credential.

Face recognition can suit regular users when enrollment and the entrance work reliably for them. Enrollment means registering the face reference used for later comparisons. Have the responsible team confirm the applicable requirements and workplace policy before collecting face data. Tell users why it is collected, where it is held, who administers it and how removal is handled. Arrange an approved card or assisted route for people who cannot conveniently use face recognition.

For a new starter, check the person, assign the role and test the normal entrance before the first busy morning. If the role changes, update their doors and hours. If the employee forgets a card or face recognition fails, reception can verify them and issue a named temporary credential with a short validity period, or follow an approved assisted-entry procedure. Record the reason and close the temporary credential when it is returned or expires.

When someone leaves, disable their access at the agreed time and check every credential attached to them. Recover physical cards and handle stored face references under the organisation’s removal process. If the office and building lobby use different systems, give each administrator the change and confirm completion in both.

Visitors: make the invitation usable at the right entrance

Have the host approve the visitor, date, arrival window and destination. Tell the guest which entrance to use, whether reception check-in is required, how to present the pass and whom to contact. A supported QR pass can be sent in advance. At reception, staff verify the visit and activate access if activation is part of the configured workflow.

Choose whether the pass allows one admission or repeated passage during the visit. A guest may need to pass through a lobby turnstile and then a meeting-room door, or go out for lunch and return. Check the permitted door sequence and return journey before selecting a one-use setting. Give a new permission if the host approves an extension, and tell the guest when it ends.

A QR code shown as the same image can be forwarded or photographed. Ask what prevents a copy from being used. Some systems offer changing codes, identity checks, use limits or a second factor. Each needs compatible readers and software. A second factor means an additional check, such as a PIN required together with the credential. Demonstrate the intended behaviour with the installed system.

For a guest without a suitable phone, reception can issue a compatible temporary card after verification. A printed QR pass is another option if that reader and workflow support it. Record the assignment to the visitor and the visit. On cancellation or completion, withdraw the permission through the configured process and recover any loaned card. Verify whether checkout actually disables access. A “checked out” label may only update the visit record.

Contractors: match recurring access to the actual job

Let the responsible manager approve each worker’s access against the job. Record the company, named worker, on-site contact, work dates and the areas needed. A maintenance team working over several weeks may need recurring access during approved hours. The job’s final end date should still close that arrangement.

For example, a technician working Tuesday through Thursday from 08:00 to 17:00 can have a card for the service entrance and assigned work area. If materials arrive early on Friday, the card should require a new approval for Friday access. Check the daily schedule as well as the date range. If the software supports only a continuous start and end period, issue daily permissions or use a staffed check rather than leaving the overnight period open.

Issue separate credentials to workers when individual control is needed. When a person is replaced, withdraw their access and approve the replacement by name. When work is suspended or finished, end the access and retrieve cards. For an approved regular worker, face recognition may be considered under the same enrollment and removal process used for employees. It still needs the correct job permissions and end date.

If one person uses face, card and QR, what happens to their permissions?

Ask the supplier to show the person record and every credential attached to it. Where the platform supports several credentials for one person, assign the intended door and time rules and test each method. Check whether the configuration accepts either face or card, or requires both in sequence. Those settings change how someone gets through the entrance.

Where separate systems hold the face reference, card and visitor pass, keep a controlled cross-reference and name the administrator responsible for each one. Record a temporary credential’s expiry as well. Giving a backup card can otherwise leave a second, longer-lasting way to enter after the main permission has ended.

A person record links to face, card and phone symbols, with a separate withdrawal mark on the card.
Where supported, link credentials to the same person. Withdraw a lost credential individually and check all linked access when the person leaves.

Example. An employee reports a lost card at 10:00. Staff withdraw that card, check that the relevant controllers received the change and issue a replacement or temporary card after verification. Their approved face access can continue if the incident and site policy allow it. If the employee leaves the organisation instead, withdraw all their access, including any face, QR, card and temporary permissions across the applicable systems.

What to do when a pass expires, is lost or fails at the door

Publish one contact for reporting a lost card or phone and nominate someone who can act promptly. Staff should identify the affected credential, disable or replace it through the supported process and check the result at the relevant doors. Reissuing a QR pass should include withdrawing the earlier one when required. For a face mismatch, first verify the person and use the approved alternative. An authorised administrator can then check enrollment, the device and the permission.

Check where the permission decision is made and how updates reach the entrance. A disconnected controller may be using previously received permissions. Ask the integrator to show what happens to expiry, a new revocation and a replacement while the connection is unavailable, and after it returns. Confirm the clock and time-zone settings used by the system. Until a required withdrawal is confirmed at an affected entrance, follow the site’s staffed control procedure there.

Tell visitors and workers how to leave if their entry permission expires while they are inside. Follow the site’s designated exit arrangement and ask reception or the contact point for help if needed. Plan that route when setting up the entrance, including after reception closes.

Confirm the credential workflow with the equipment supplier

Use the face and identity terminal range to choose a form that fits your entrance, then specify the credential methods needed. The HAS-35P-PA08-S0 product page lists card and ID-card reading as optional. Specify the required card technology and ask for the proposed reader, software version, licence and controller combination. Include QR issuance and scanning explicitly if you need it.

For the lock, controller and mounting, see the face-terminal equipment guide. If the entrance uses a pedestrian gate, see the tripod, flap and swing gate comparison.

Give the supplier your three person groups, the doors each may use, the daily hours, end dates and fallback method. Ask for a demonstration of a normal entry, the wrong door, out-of-hours use, an expired visitor, a lost credential, a full offboarding and a disconnected entrance. Check the event log and the physical result at the door for each case. Those demonstrations show how the proposed credential workflow will operate in your office.

Featured image: Choose the credential and entry process for each person’s role, visit and available equipment.

WhatsApp